Description

SD2IEC Classic – 1541 Disk Emulation for internal installation.

Requires soldering to fit, no connectors or cable supplied!

Supports JiffyDos, Geos, Final Cartridge III, Exos, TurboDisk, Epyx FastLoad, Speeddisk and Dreamload Fastloaders.

Compatible with D64,D71,D81,M2I and PRG file formats

LOAD and SAVE files the same you would with a real disk drive

LED’s are fitted on this edition. Photo out of date.

Defaulted to drive 8. EG.. LOAD”$”,8 – Drive ID can be changed via BASIC

User guide included – Pinouts HERE

Want to print your own SD2IEC Classic Mounting Bracket? 

@_GazMarshall has done the work for you Thingyiverse – ClasClip

*Updated* SD2IEC Classic v1.1 PCB with Atmega 1284p

Bootloader & latest firmware pre-installed

Firmware upgradable via SDcard – sw2-m1284p

For internal installation only, requires soldering to fit. Bracket NOT included

The SD2IEC Classic PCB is 66x31mm

Need some files to get yourself going? Download the Lite SD card starter pack and unpack directly to a formatted SD card

Shipping – TFW8b uses a combination of services from DHL, Royal Mail & Deutsche Post.

Connector options:

Not with this flavour!

This device must be installed into something. Bare PCB’s should not be used with your classic computer. Handling a PCB that is not encased will cause static damage. 

SD2IEC firmware is available as Gnu Public License v2

Visit www.sd2iec.de and may I suggest donate to the SD2IEC firmware author/developer Ingo Korb